RDM stands for Remote Device Management.It is a protocol enhancement to USITT DMX512 that allows bi-directional communication between lighting consoles and RDM compliant devices over a standard DMX line.So it allows configuration, status monitoring and management.To use RDM, you need an RDM-enabled DMX controller and fixtures that are RDM compatible and compliant. If you use DMX splitters, these will also need to be RDM-enabled and compliant as well.
DMX signal booster & splitter
RDM E1.20 compliant
1 input to 6 outputs
3pin & 5pin DMX In
3pin & 5pin DMX Thru
3pin & 5pin DMX Out
100% isolation for all inputs and outputs
Signal & power LED indicator for output
Boost/repeat RDM/DMX signals
Regenerate/clean RDM/DMX signals
Split RDM/DMX signals and build star topologies
Connect a large number of fixtures to a single universe
Prevent reflection on signal lines
Rack or Truss mounting
Power input: AC 110V or 230V
Size: 482 x 147 x 44 mm (1U rack mount)
Weight: 1.8 kg
